What could the problem be?
robb at bossleyfamily.com
robb at bossleyfamily.com
Thu Jun 10 14:41:36 EDT 2004
Just to give an update. It does appear to be something that is going
wrong with the processor, motherboard, or hard drive setup. I was able to
unzip the bz2 kernel with bunzip2 first, but in compiling, I got
segmentation faults. It would run for a while without any errors, and
then a segmentation fault would occur. I don't know if it has something
to do with the software raid that I have running, or if it is just a
hardware issue. Any ways to check this problem and narrow it down?
> Robb Bossley wrote:
>> I have an older computer which I have utilized for the past couple of
>> years. Recently, I reinstalled Linux on it for the Nth time, this time
>> utilizing the fact that I have two scsi drives and making all but one
>> partition part of a RAID array.
>>
>> My question is this. I have tried to copy the latest kernel (2.6.6) in
>> bz2 form onto this computer, both from my usb storage device and from a
>> one time writeable disk. Each copies just fine. However, when I go to
>> untar it (tar -xjvf), I get a complaint that the headers?? for the bz2
>> format are corrupted. The odd thing is that each time was from a
>> different download, and the downloads are fine because they work on
>> other computers when unzipped just fine.
>>
>> What would this indicate, and is there any way to fix the problem? I
>> suspect a failing hard drive may be the culprit, but I'm not sure. Is
>> there a good way to test the harddrives? All I want to do is upgrade
>> the kernel.
>>
>> Thanks,
>>
>> Robb
>
> I had an Athlon 700 that developed this problem. I suspect that it was
> the processor, or possibly the motherboard. Everything else I had
> swapped out. I could make the problem worse by doing processor
> intensive tasks such as ripping mp3s. It also would fail while
> compiling the kernel and a simple restart of the compile would go
> further and so on until it was done. I underclocked it and used it for
> another 6 months and it started happening again. I sold it on ebay with
> full disclosure.
>
> Judd
> _______________________________________________
> colug mailing list
> colug at colug.net
> http://www.colug.net/mailman/listinfo/colug
>
More information about the colug
mailing list