[COLUG] Re: Unknown device 5a37 on Acer 5100 (Ubuntu Feisty Fawn) Info found

charles morrison charlie2 at ledgible.com
Mon Jul 30 23:13:14 EDT 2007


Charlie Morrison wrote:
> I have installed 64 bit Feisty on my Acer 5100 laptop and after MANY 
> hours of searching on various sites, I have found nothing which works 
> solving the pci problem shown here in the lspci output:
>
> 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37
> 00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA 
> Controller (rev 80)
> 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host 
> Controller (rev 80)
> 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host 
> Controller (rev 80)
> 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host 
> Controller (rev 80)
>
> Unknown device 5a37?
>
> Anyone have a clue as to what this means?
>
> I have found it all over the internet but no one seems to address it 
> specifically and gives a clue about what it is or does. It seems to be 
> related to OpenGL or something, but everything I have tried does not 
> work. This has been a problem for quite a few versions of Linux and Kubuntu.
>
> I have installed Beryl, ATI drivers, played with xorg, etc. I would 
> really like to know what device 5a37 is, and what it does. I even 
> checked the device register for device codes without success.
>
> Another error which I have not tried to solve is:
>
> 06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology 
> Inc: (rev 01)
> 06:04.4 FLASH memory: ENE Technology Inc Unknown device 0551 (rev 01)
>
> Unknown device 0551?
>
> I believe this one is for the built in flash card reader. They may be 
> related. If so, can some one please show me where to get info.
>
> Thanks,
>
> Charlie Morrison
>
>   
Ok, I managed to find the hardware list while looking for another 
problem. At least I have a clue what the hardware is. The hardware for 
the Acer Aspire 5100 can be found at:

http://hardware4linux.info/server/system/347/

The PCI bridge 5a37 is part of the RS480 bridge, and the 0551 error is 
from SD/MMC card reader controller. Now I need to get the fixes.


Charlie Morrison

-- 
Charlie Morrison
American LED-gible, Inc
1776 Lone Eagle Street
Columbus, OH  43228  USA
614-851-1100
FAX  614-851-1121
We use ISO 26300 document standards available through Open Office at http://www.openoffice.org






More information about the colug432 mailing list